Building damp-free cavity walls
BRE (Building Research Establishment) is an independent, research-based consultancy, testing and training organisation, operating in the built environment and associated industries.
Building damp-free cavity walls (GG 33 revised) was written by Barry Reeves and Chris Scivyer and published by BRE on 18 March 2015.
In driving rain, water leaks through the outer leaf of most cavity walls, often in quite large quantities. Provided the damp-proofing measures are correctly designed and installed and the wall itself is reasonably free from defects, this water does not reach the inner leaf, but flows harmlessly down the cavity face of the outer leaf until it reaches the footings or is directed out of the cavity via cavity trays or window/door lintels.
However, even though many cavity wall details are long-established and designed with the express purpose that the inner leaf stays dry, dampness is still a common problem. This is generally due to faulty design or construction of damp-proofing measures or the wrong choice of materials.
This 6-page Good Building Guide replaces guidance published in 1999, and offers advice about how to ensure new cavity walls do not suffer from damp. It is intended for architects and other designers, engineers, site managers, house builders and masonry contractors.
Its contents are:
- Introduction.
- Defects in the outer leaf.
- Problems caused by wall ties.
- Defects linked to cavity insulation.
- Where damp-proof courses and cavity trays are needed.
- Installing damp-proof courses.
- Installing cavity trays.
- Weepholes.
- Conclusion.
- References.
- Further reading.
[edit] Find out more.
[edit] Related articles on Designing Buildings Wiki
- BRE articles on Designing Buildings Wiki.
- BRE Buzz articles on Designing Buildings Wiki.
- BRE Buzz.
- BREEAM.
- Building Research Establishment.
- Cavity tray.
- Cavity wall.
- Damp in buildings.
- Damp proof membrane.
- Damp proofing.
- Damp-proof course.
- Dew point.
- Diagnosing the causes of dampness (GR 5 revised).
- Penetrating damp.
- Understanding dampness.
- Wall ties.
- Weep hole.
Featured articles and news
BSRIA Briefing 2024: Sustainable Futures speakers
Redefining Retrofit for Net Zero Living 22 Nov.
Wall of support for post-Grenfell regulation of electricians
Call for a shake-up of the construction industry highlighted on radio.
Digital sustainability through future AEC tools
Bringing together industry and academia to meet challenges.
Skills gap for net zero highlighted to Minister for Industry
ECA convenes roundtable discussion at Portcullis House.
Evidencing Net Zero with the new UK buildings standard
Pilot version with detailed excel proforma out now!
Scottish Building Safety Levy, in consultation
From direct remediation and the RPDT, to the costs and alternatives.
Waves of warmer homes grants for the rental sector
Boosting energy efficiency standards for all rented homes.
A refocus of the National Planning Policy Framework
Key terms described in brief, as the consultation closes the evening of the 24th.
Fortified farmhouses of the unruly 16th-and 17th-century borders.
ECA shares advice for those who may be exposed to risks.
How to revolutionise UK housing with MMC
CIC and Supply Chain Sustainability School unveil a plan.
From the UKs largest manufacturer and supplier of lime.
From mud bricks to smart concrete
A brief history from 7000BC to a future on the moon.
Regulator of Social Housing publishes latest fire safety report
Covering remediation of 11 metre plus social housing sector buildings.
Apartment and Duplex Defects Remediation Bill 2024
Approved for priority drafting by Government of Ireland.
The long list with in the frame of key historical events.
Competence frameworks for sustainability in the built environment
Code of practice, core criteria consultation draft for comment.
New Floods Resilience Taskforce
With a wet met office autumn prediction.
Comments
Building damp-free cavity walls involves proper design, construction, and maintenance to prevent the accumulation of moisture within the cavity space. Cavity walls are constructed with an outer and inner leaf separated by a gap known as the cavity. Here are some essential steps to ensure damp-free cavity walls:
1. Proper Design:
Ensure that the cavity wall system is correctly designed to include adequate ventilation and drainage measures. A well-designed cavity will allow water to drain away from the wall effectively.
2. Quality Materials:
Use high-quality materials for the cavity wall construction. This includes appropriate bricks or masonry for the outer and inner leaves, along with durable cavity wall ties and insulation.
3. Cavity Wall Insulation:
Proper insulation helps regulate the internal temperature of the building and prevents condensation. Use suitable insulation materials, and ensure they are correctly installed without gaps or voids.
4. Damp-Proof Course (DPC):
Install a damp-proof course between the inner and outer leaves of the wall. The DPC acts as a barrier to prevent moisture from rising from the ground and entering the building.
5. Cavity Wall Ventilation:
Incorporate ventilation openings at the top and bottom of the cavity to allow air circulation and moisture escape. This helps to maintain dry conditions within the cavity.
6. Cavity Wall Weep Holes:
Weep holes are small openings at the bottom of the cavity wall that allow any water that enters the cavity to drain out. These weep holes should be kept free from obstructions.
7. Cavity Wall Flashings:
Use appropriate flashings, such as lead or plastic, around openings like windows and doors to prevent water from entering the cavity.
8. Regular Inspection and Maintenance:
Periodically inspect the cavity walls for any signs of damage, cracks, or issues that may lead to water penetration. Address any problems promptly to maintain a damp-free cavity.
9. External Landscaping:
Ensure that the ground level surrounding the building slopes away from the walls. This helps to divert rainwater and prevents it from collecting around the base of the building.
10. Address Water Leakage:
If you notice any water leakage or dampness within the cavity wall, investigate the source of the problem and rectify it immediately. This may involve repairing or replacing damaged flashings, weep holes, or pointing.
By following these guidelines and using best practices in cavity wall construction, you can significantly reduce the risk of dampness and ensure the longevity and integrity of the building's structure. It's essential to work with experienced architects, builders, and construction professionals to ensure that all the necessary measures are taken to create damp-free cavity walls.